This Stevens manufactured seventh variation receiver is for the Favorite single shot falling block rimfire rifle and is in very good condition exhibiting a grayish brown patina with light surface rust specks and possibly a few faint specks of pitting. Receivers for smooth bore barrel will have a "U" shaped channel along the top bridge of the receiver. This is the only part on the Favorite rifle that is tracked as a firearm therefore it will need to be transferred through a dealer. Receivers do not qualify as a C&R based on BATFE's guide lines. (file photos)

Note: Seventh variation receivers will have (1) the round cut frame, (2) the longer 3 3/16" long lower tang with the threaded hole for the 2nd variation mainspring screw, (3) the longer 5/8" long rectangular opening for the trigger, (4) lacking any extractor notch therefore designed for the 2nd variation (aka 6 o' clock) extractor with the wider upper portion, (5) is lacking the threaded hole on the forward belly of the receiver for supporting the lever spring screw.

Related Parts: the following list of parts will normally be found on a Favorite single shot rifle having a seventh variation receiver when it originally left the factory new: 3rd variation mainspring, 2nd variation mainspring screw, 3rd variation hammer, 2nd variation (aka 6 o' clock) extractor with the wider upper portion, 3rd variation link, 3rd variation breech block, 3rd variation lever featuring the bushing and plunger system and a 3rd variation butt stock with a hard rubber butt plate.

Proof: Seventh variation receivers have been diss-assembled and thoroughly observed by CFN Parts to make the above conclusions with the following serial numbers on the lower tang: I882.